Description
The NOTIFIER FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The FSP-951 Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the FSP-951T. The FSP-951R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detectors are available for both Flash Scan and CLIP applications as designated.
Features
• New modern profile for improved aesthetics.
• Designed to meet UL268 7th Edition.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Compatible with FlashScan and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on
FlashScan systems).
• Optional remote, single-gang LED accessory.
• Dual LED design provides 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector is
addressed, and illuminate steady red on alarm (FlashScan systems
only).
• Remote test feature from the panel.
• Walk test with address display (an address on 121 will blink the
detector LED: 12-[pause]-1(FlashScan systems only).
• Built-in functional test switch activated by external magnet.
• Built-in tamper-resistant feature.
• Sealed against back pressure.
• Expanded color options.
• SEMS screws for wiring of the separate base.
• Optional relay, isolator, and sounder bases.
Chat with us
Chat with us